|
Worlds
Finest!
|
|
ITS Cap on left, XR on
right. |
|
|
Billet
water cooled top caps for Bravo outdrives
|
|
NEWS!!! Now
available for "New Style" Bravo XR drives!
|
CNC machined from
a solid piece of T6016 billet. Completely
replaces stock cast cap. Nine water openings
shower the drive housing. Three internal passages
cool bearings and gear oil. Over 300% stronger
than stock. Normally drops internal oil temperatures
by at least 50 degrees. (Above and beyond a drive
shower) Available with new HP bearing
and race installed. Also available with stainless
pick up assy. Bravo 1, X series, old and new XR and ITS caps....all
in stock and now
available.
|
|
|
PART#
BBTC-1
(satin, nice aluminum finish)
BBTC-1B (Hard Black Anodized, fresh or salt water OK)
BBTC-1C (Custom Chrome plated)
With Tower Inner Needle Bearing Installed
With Tower
Outer Gear Race Installed
NEW! Inegrated Transom System In Stock!
ITS Bravo XR Cap (Blk. Anod. W/O
Bearings)
Complete Topcap Kits.
BBTC-1-KITB (Complete Kit w/ pick up, Black)
BBTC-1-KITC (Complete Kit w/ pick up, Custom Chrome)
Custom heights
for twin/triple, cap/wing-plate steering.
WATER PICK-UPS / KITS
Stainless Pick Up Kit, Stainless Hose Kit w/ Endura
Fittings
Stainless Pick
Up Kit, Stainless Hose Kit w/ Anodozed Ftngs
Stainless Pick
Up Kit, Rubber Hose Kit w/ Pushlock Fittings
Stainless Pick
Up Only (#6 End Or Push Lock End) *Use your
hose/fittings*
|
PRICE
$275
$290
$490/Call
$23
$42
$385
$392
Call
Call
|
|
|
|
|
|
|
Single
Oil Filter
(shorty units now available for tight hatch clearances)
|
|
Stop
the mess when changing your oil, just spin off the
original oil filter and spin on this new billet aluminum
housing. The housing holds a drop in cartridge,
filters to 8 microns and flow 1 1/2 quarts more per minute than the stock
unit. The machined fins help cool the oil and a
magnet
has been placed in the lid to catch loose particles.
Direct Mercruiser kits available.
|
|
Part#
SOFH-1
|
Price
199.00
|
Rplcmnt.
Elements
$23.00ea.
|
|
|
|
Dual
Oil Filter
Made
from a solid block of marine grade billet T6016 aluminum. This
filter holds two 8 micron, high flow filters. Four
filtered ports allow for
gauge senders and valve spring oilers. Permanent magnets in
the lid attract any loose particles.
(Click here to
see) O-rings placed
in top of housing, not lid to prevent them from falling
out during servicing. A special bracket is available
to mount filter in the front of engine, to directly
replace the OEM spin on filter or on the rear of a
cylinder head.
|
|
Part#
DOFH-1 |
Price
$312.00
|
BBC
Mounting Bracket $39.00 |
|
|
|
|
|
Thermostat
Kit for Dual Filter |
|
Fits
same
dual oil filter as listed above. Contains a high flow
190-degree oil thermostat. Machined from marine
grade billet T6016 aluminum. Attaches directly to the bottom of
the dual oil filter. Thermostat available with dual
oil filter (above) as a kit or separately.
CLICK HERE FOR
TECHNICAL DRAWING & PLUMBING SCHEMATICS. |
|
Part#
OTH-1
|
Price
$240.00
|
|
|
190
T-STAT |
Price
$48.00 |
|
|
|
|
|
|
HP500, HP525 and
SC575 H2O Crossover Kits
|
|
Replaced the stock
cast iron, water circulation pump with a high flow, billet
water cross-over. Complete kit re-uses stock anodized
water pump pulley and stock serpentine belt! Replaces
the OEM water pump, OEM thermostat housing and numerous
"radiator" style hoses. Lighter, more efficient,
simplifies cooling hoses and plumbing. All fittings,
bolts, hoses and instructions included.
VERY TRICK! |
|
$625.00 Complete Kit |
$525.00 W/O T-Stat
Housing |
Call for availability! |
|
|
|
|
|
Complete
Billet "XR" Drive
|
|
This
is Billet Marine's complete custom drive. This "Billet
- Bullet" drive has been offshore tested to 1200hp
and 135MPH. Custom XR gears, machined stainless
steel sleeve inserted in bottom of housing, water
cooled billet top cap, HP bearings. Available
in 1.5, 1.35. 1.25 final drive ratio and +/- 1" & 2"
lowers. Also available as Upper or Lower only.
|
|
|
Part#
BBD - XR
|
Call For Prices and Options
|
$7,500-$9,200
|
|
|
|
|
|
Bravo XR
Gear Conversion
|
|
Billet
Standard, XZ or X Bravo to XR conversion (Using your
original drive housing and input shaft)
Upgrade
your Bravo I, II, III, X or XZ drive to a much stronger XR.
Billet
Marine Conversion includes:
Stainless Steel housing
insert (CNC machined), billet water cooled top cap, chromoly
drive shaft conversion yoke, XR gears, bearings and shims,
assembly and HP clearance drive.
|
|
PART#
BXRK-1
|
Price
$3600.00 (Upper only)
|
Lower conversions also available.
|
|
|
|
|
|
Billet
Shaft Kits
|
|
One
piece aerospace alloy shafts. Torsion vertical
shafts are specially hardened and finished.
Alloy
prop shafts are available in stock dimensions or
with larger bearings and XR size O.D. (this requires an upgraded
bearing carrier, made of solid billet )
1"
stock diameter
or 1-1/4" (XR size) diameter.
|
|
|
Part#
PSK-1
|
Call
For Prices
|
1" and 1-1/4"
|
|
|
 |
|
Bearing
Upgrades
|
|
Bearing
upgrade. Replace your high hour, weak bearings
or upgrade your current drive to handle more power.
These separated roller bearings carry greater loads
and in turn produce less heat. Caged roller
bearings replace the stock "stacked" Mercruiser design.
Dollar
for dollar the best drive upgrade you can do.
|
|
|
Part#
BBBK-1
|
Price
$120.00 + up
|
|
|
|
| |
|
|
|
|
Trim Cylinder Caps
(click on picture for larger view)
|
|
This
is one of our cool dress-up items. It's a one piece
stainless cap that replaces the factory plastic cap/nut
cover for the trim cylinder shaft. Provides added strength and great looks.
Available in stainless (Std.) or hard anodized black aluminum.
Matches Blue
Water Indicator caps nicely.
|
|
|
Part#
TCC-1-SS
|
Price
$19.00
|
Best seller!
|
|
|
|
|
|
Billet
Prop Cap for #3 - #6 Speedmaster Drives
(Now available for Arneson Drives)
|
|
This is another of our dress-up items. It covers
the brass prop nut and helps deter theft.
Threads on to shaft and locks in place with 1/2-20 set
screw.
Our early test results have show a small improvement
with getting on plane earlier. (go figure!)
Polished
stainless steel and aluminum available.
|
|
|
Part# PNC-1-SS
Spanner Wrench $23
|
Price
$55.00ea. Merc #6
or
$72.00 (Arneson)
|
Hot Item!
|
|
|
|
 |
E-mail for special pricing on
Revolution Marine Exhaust.
Great value and performance.
Intercoms, oil coolers and brackets
also available. |
 |
|
Stainless
Fuel Rail w/ Bypass
|
|
This
is our stainless by-pass fuel rail for 871-1471 blowers.
Non restrictive design with fuel return. Supports
up to 2000HP. Four welded mounting brackets
fit under blower bolts. Fuel outlet for each
float bowl. Very trick!
|
|
|
Part#
BSFR-1
|
Call
For Price
|
No Fuel restrictions!
|
|
|
 |
|
Billet
Scoop Bezels
|
|
These
are a real cool dress-up item. They are a must have
item to clean up the edges on fiberglass scoops with
rear holes for ventilation. These bevels are
hat shaped and fit into holes with RTV to cover raw
edges. They
fit into an 1 3/8" diameter hole.
|
|
|
Part#
ASB-1
|
Price
$23.00ea
|
Stainless
|
|
|
 |
|
Polished
Valve Covers W/ Spring Oilers
|
|
These
are a must for high lift roller cams. Each cover
has 4 direct valve spring oiler spray bars. Helps
with startups, spring temperatures and long runs.
Combine with our "Dual Oil Filter/Oil Cooler
Thermostat" for maximum efficiency. Great
dress us item too.
|
|
|
Part#
BVC-50-1
|
Call
for $$$
|
Sheet metal/welded styles available
too.
|
|
|
|
Picture coming soon. |
|
Stainless
Valve
Cover Bolt/Stud
|
|
Stainless extra tall nut w/ allen
socket in top. Allows valve cover bolt access
with exhaust still in place. Very trick!
|
|
|
Part#
VCSO-1
|
Price
$10.00ea
|
|
|
|
|
 |
|
Valve
Cover Breather
|
|
Cast &
polished breather assy. Compliments any valve
cover or puke tank.
SOLD OUT! Call for availability.
|
|
|
Part#
VCBF-1
|
Price
$16.00
|
|
|
|
|
 |
|
Billet
Fluid Resevoirs!
|
|
Reservoir, 24 & 48 oz. Merc. - blue anodized
$189.99 - $199.99
4.0" OD x 5.0" & 8", Special reservoir accepts factory
Mercruiser low fluid level sensor. Excellent stock replacement
for both the Mercruiser round bottle or square bottle
reservoirs providing approximately the same volume for fluid
expansion or larger capacity for HP use.
Trim Pump Reservoir
$189.00
Trim pump reservoir is made of cast aluminum, has polished
billet cap and clear site glass to check oil level at a
glance. Available in 4 bolt and center bolt design's. Stocking
color will be mercruiser blue, all other color's will be
custom with a 2 week wait time to ship.
|
|
|
|
 |
|
Blowers
& Superchargers
|
|
BILLET
MARINE IS A DEALER FOR.....
"The
Blower Shop" and Whipple superchargers.
All kits on special now!
Also:
Imco and Eddie Marine Products. We will not
be undersold!
Ask about
our Lightning Header special!
|
|
|
|
|
